I like standup desks and had a design rattling around in my noggin. Here is the parts list.
- 7, 1 in. Black Iron Floor Flange
- 3, 1 in. x 12 in. Black Iron Threaded Pipe
- 1, 1 in. x 18 in. Black Iron Threaded Pipe
- 28, #10 x 3/4 in. Zinc Plated Phillips Flat Head Wood Screw
- 1, 2 ft. x 4 ft. 3/4 in. hardwood ply (I used birch)
- 1, Universal Bracket Pole Mount with Removable 75mm and 100mm VESA Plate
I maximized the sheet of plywood by marking two triangles with 32 in. on the long side. That left small 16 in. triangles.
I clamped a guide on before cutting with a circular saw. I should have used a plywood blade, but I didn't have one laying around. It splintered a little, but not bad.
Here's the 18 in. pipe with the VESA clamp.
And the whole thing with a Pi 400.
